TR
EN
DEShowing all 10 results
AVIATION
- H_09
Aircraft Control
H_09The visitor will touch and move the control points of the airplane in the open part of the device and in this way he/she will be able to see the change in the movements of the airplane in the lantern. Thus, they will witness the effect of the control points not only on the surface they touch but also on the airplane.
H_09 - H_10
Fuels
H_10Visitors who will experience the station will understand the fuels used in aircraft and the reasons for which fuel is preferred for which aircraft.
H_10 - H_06
How Do Wings Take Off?
H_06Visitors will activate the airflow by pressing the button. The visitor will observe the lifting of the wing under the influence of the air flow or wind force. The visitor will be able to adjust the wind speed with the 3-stage dial button and repeat the process by increasing the speed by one more step.
H_06 - H_01
How Helicopters Fly
H_01Visitors will experience the connection between the rotation of the propellers and the aerodynamic effect and will pilot their own helicopters with joystick levers.
H_01 - H_02
Jet Engine
H_02Visitors will realize that there are different types of aircraft engines at this station and will mainly learn about jet engines. They will examine the events that occur as a result of the physical and chemical changes that take place inside the jet engine. They will also be able to interactively experience the main parts that make up the jet engine with digital designs and models.
H_02 - H_03
Paper Airplanes
H_03Visitors will take paper from the hopper and design an airplane. They will be able to make their own design or they will be able to benefit from the sample designs in the area. They will drop their designed airplanes on the launching device and adjust the angle by turning the lever to aim. When the tilt setting is ready, they will automatically fly the paper airplane by pressing the launch button.
H_03 - H_07
Propellers
H_07When the user stands at the table, he/she will press the start button on the control panel to start blowing air and adjust the blowing speed with the rotary knob. By turning the air blowing pipe at certain angles, it will create a wind effect on the turbines. They will discuss which turbine will have more revolutions and speed in an identical wind based on the values on the meters. Will be able to interpret the advantages of turbines according to their propeller shapes.
H_07 - H_08
Turkish Aviation History
H_08Visitors will learn about the historical development of our country in the field of aviation and the people who did important work in this field in the past. They will comprehend the importance of these people and events that contributed to Turkish aviation.
H_08 - H_05
Wing Structure
H_05In the unit, visitors will encounter a water-supported mechanical device that explains why the leading edge of the wing structure is round and the trailing edge is sharp.
H_05 - H_04
Wing Types
H_04visitors will learn about turbulence, a natural phenomenon that poses a significant danger in airplane travel. They will realize the aerodynamic effect
in the interaction of the parts that make up the aircraft structure with the air.H_04
